There is a separate log for the MTELRelay port. In the menu click on Configuration and then Show Relay Log as shown below.

The log shows the connection status and the data flow to the MTELRelay such as sending a message as shown below.

In the log above the prefixes have the following meanings

RQST is outgoing paging message packet to the Relay.

RESP is a response from the Relay about the transmission of the packet to the MDS system.

RRPY is a response from the Relay about the transmission of the packet to the MDS system.

ELog is a response from the MDS Switch.

[ Home ] [ Up ]  
Copyright © 2012-2021 MTEL Communications Pty Ltd
Last modified: 01-Jun-2022